Lexus LX600 2021 - Child Restraint System Suitability for Various Seating Positions

98
1-2. Child safety
Q ISOFIX rigid anchors (ISOFIX
child restraint system)
Lower anchors are provided for the
second outboard seats. (Marks dis-
playing the location of the anchors are
attached to the seats.)
Q Child restraint system suitability
for various seating positions
The child restraint system compatibility
table (oP.98), with symbols, displays
the types of usable child restraint sys-
tems and possible seating position
installation for the child restraint sys-
tem owned by the customer. Confirm
in accordance with the listed Size class,
Anchor, as well as “Confirming the
Mass group and Size class for ECE
R44 ISOFIX corresponding child
restraint systems”.
Q Confirming the Mass group and
Size class for ECE R44 ISOFIX
corresponding child restraint sys-
tems
1
Confirm the corresponding “Mass
group” from the weight of the child
(oP.90)
(Ex. 1) When the weight is 12 kg, “Mass
group 0+”
(Ex. 2) When the weight is 15 kg, “Mass
group I”
2
Confirming Size class
Select the Size class corresponding to
“Mass group” confirmed in step
1
from the
“Child restraint systems fastened with ISO-
FIX - Compatibility table” (oP.98)
*
.
(Ex. 1) When “Mass group 0+”, the corre-
sponding size class is “C”, “D”, “E”.
(Ex. 2) When “Mass group I”, the corre-
sponding size class is “A”, “B”, “B1”, “C”,
“D”.
*
: However, listings that are marked with
“X” cannot be selected, despite having
the corresponding size class in the suit-
ability table of the “Seating position”.
Q Child restraint systems fastened with ISOFIX - Compatibility table
ISOFIX child restraint systems are divided in different “size class”. According to
this “size class”, you will be allowed to use it in the vehicle seating position men-
tioned in the table below. To know your child restraint system “size class” and
WARNING
O After securing a child restraint system,
never adjust the seat.
O When a junior seat (booster seat) is
installed, always ensure that the shoul-
der belt is positioned across the center
of the child’s shoulder. The belt should
be kept away from the child’s neck, but
not so that it could fall off the child’s
shoulder.
O Follow all installation instructions pro-
vided by the child restraint system
manufacturer.
Child restraint system fixed with
an ISOFIX rigid anchor