Lexus LX600 2021 - Turn Signal Lever; Parking Brake

237
4
4-2. Driving procedures
Driving
The turn signal lever can be used to
show the following intentions of the
driver:
1
Right turn
2
Lane change to the right (move the
lever partway and release it)
The right hand signals will flash 3 times.
3
Lane change to the left (move the
lever partway and release it)
The left hand signals will flash 3 times.
4
Left turn
Q Turn signals can be operated when
The engine switch is in ON.
Q If the indicator flashes faster than usual
Have the vehicle inspected by your Lexus
dealer.
Q Using the manual mode
The parking brake can be set and
released manually.
1
Pull the switch to set the parking
brake.
The parking brake indicator light will turn
on.
Pull and hold the parking brake switch if an
emergency occurs and it is necessary to
operate the parking brake while driving.
2
Push the switch to release the park-
ing brake.
Turn signal lever
Operating instructions
Parking brake
The parking brake can be set or
released automatically or manually.
In automatic mode, the parking
brake can be set or released auto-
matically according to shift lever
operation. Also, even in automatic
mode, the parking brake can be set
or released manually.
Operating instructions