3-6. Favorite settings
the system, they are authenticated by fin-
gerprint. (oP.112, 228)
An individual identified using fingerprint
authentication is prioritized even when an
individual is identified with an electronic
key.
z Bluetooth
®
device
An individual is identified when a
Bluetooth
®
device is connected to the
multimedia system. For information on how
to connect Bluetooth
®
devices, refer to
the “Multimedia Owner’s Manual”.
When an individual is identified with an
electronic key or fingerprint authentication
(if equipped), identifying using a
Bluetooth
®
device is not performed.
When an individual is identified from
an authentication device, settings for
the following functions are recalled.
z Driving position (memory recall
function)
After an individual is identified, the driving
position that was set when driving was last
completed is recalled when either of the
following operations is performed.
• An individual is identified when elec-
tronic key: The door is unlocked and
opened using the smart entry & start sys-
tem or wireless remote control.
• An individual is identified when a finger-
print authentication system (if
equipped): The engine switch is turned
to ACC or ON.
Refer to P.206 for information on driving
position registration and recall.
z Meter displays, head-up display (if
equipped) information
*
and multi-
media information
*
When an individual is identified, the display
settings used when the engine switch was
last turned off are recalled.
z Multi-terrain Monitor
*
When an individual is identified, the display
settings used when the engine switch was
last turned off are recalled. (oP.355)
z Vehicle settings that can be set
using the multimedia system
*
When an individual is identified, the vehicle
settings used when the engine switch was
last turned off are recalled.
*
: Some settings are excluded
Recalled functions