EasyManua.ls Logo

Lexus LX600 2021 - Driving the Vehicle; Driving Procedure

Lexus LX600 2021
690 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
213
4
4-1. Before driving
Driving
4-1.Before driving
Q Starting the engine
oP.228
Q Driving
1
With the brake pedal depressed,
shift the shift lever to D. (oP.234)
2
If the parking brake is in manual
mode, release the parking brake.
(oP.237)
3
Gradually release the brake pedal
and gently depress the accelerator
pedal to accelerate the vehicle.
Q Stopping
1
With the shift lever in D, depress
the brake pedal.
2
If necessary, set the parking brake.
(oP.237)
If the vehicle is to be stopped for an
extended period of time, shift the shift lever
to P or N. (oP.234)
Q Parking the vehicle
1
With the shift lever in D, depress
the brake pedal.
2
Set the parking brake (oP.237),
and shift the shift lever to P
(oP.234).
3
Press the engine switch to stop the
engine.
4
Lock the door, making sure that
you have the electronic key on your
person.
If parking on a hill, block the wheels as
needed.
Q Starting off on a steep uphill
1
With the brake pedal depressed,
shift the shift lever to D. (oP.234)
2
Pull the parking brake switch to set
the parking brake manually.
(oP.237)
3
Release the brake pedal and gently
depress the accelerator pedal to
accelerate the vehicle.
4
Press the parking brake switch and
parking brake is released manually.
Q When starting off on a uphill
The hill-start assist control will activate.
(oP.431)
Q Driving in the rain
O Drive carefully when it is raining, because
visibility will be reduced, the windows
may become fogged-up, and the road
will be slippery.
O Drive carefully when it starts to rain,
because the road surface will be espe-
cially slippery.
O Refrain from high speeds when driving on
an expressway in the rain, because there
may be a layer of water between the tires
and the road surface, preventing the
steering and brakes from operating
properly.
Q Engine speed while driving
In the following conditions, the engine
speed may become high while driving. This
is due to automatic up-shifting control or
down-shifting implementation to meet driv-
ing conditions. It does not indicate sudden
acceleration.
O The vehicle is judged to be driving uphill
Driving the vehicle
The following procedures should be
observed to ensure safe driving:
Driving procedure

Table of Contents

Related product manuals