Lexus LX600 2021 - Page 208

207
3
3-6. Favorite settings
Before driving
tem.
z Driving position registration proce-
dure
When the shift lever is shifted to P after
driving the vehicle, the current driving
position will be recorded.
z Driving position recall procedure
Turn the engine switch to ACC or ON.
After fingerprint authentication was suc-
cessful, the seat, steering wheel and head-
up display (if equipped) (only when the
engine switch is turned on) move to the
registered driving position.
If the driving position is in a position that
has already been recorded, the driving
position will not move.
z Memory recall function cancelation
procedure
Delete fingerprint information on the fin-
gerprint authentication.
For information on deleting fingerprint
information, refer to the “Multimedia
Owner’s Manual”.
Q When My Settings is turned off:
Each electronic key can be registered
to automatically recall your preferred
driving position.
z Driving position registration proce-
dure
Record your driving position to button “1”,
“2” or “3” before performing the following:
Carry only the key you want to register,
and then close the driver’s door.
If 2 or more keys are in the vehicle, the
driving position cannot be recorded prop-
erly.
1
Check that the shift lever is in P.
2
Turn the engine switch to ON.
3
Recall the driving position that you
want to record.
4
While pressing the recalled button,
press and hold the door lock switch
(either lock or unlock) until the
buzzer sounds.
If the button could not be registered, the
buzzer sounds continuously for approxi-
mately 3 seconds.
z Driving position recall procedure
1
Carry the electronic key that has
been registered to the driving posi-
tion, and then unlock and open the
driver’s door using the smart entry
& start system or wireless remote
control.
The driving position other than the steering
wheel and head-up display (if equipped)
will move to the recorded position. How-
ever, the seat will move to a position
slightly behind the recorded position in
order to make entering the vehicle easier.
If the driving position is in a position that
has already been recorded, the driving
position will not move.
2
Turn the engine switch to ACC or
ON, or fasten a seat belt.
The seat, steering wheel and head-up dis-
play (if equipped) (only when the engine
switch is in ON) will move to the recorded
position.