3-6. Favorite settings
Q Operating the driving position memory
using the voice control system
*
*
: If equipped
The following operation can be performed
using the voice control system.
O Recording a driving position
O Recalling a driving position (it can be per-
formed only when the shift lever is in P)
For details regarding the voice control sys-
tem, refer to the “Multimedia Owner’s
Manual”.
Q Operating the driving position memory
after turning the engine switch off
Recorded seat positions can be activated
up to 180 seconds after the driver’s door is
opened and another 60 seconds after it is
closed again.
Q When recalling the driving position
Take care when recalling the driving posi-
tion so that the head restraint does not
touch the ceiling.
Q When the recorded seat position can-
not be recalled
The seat position may not be recalled in
some situations when the seat position is
recorded in a certain range. For details,
contact your Lexus dealer.
Q When My Settings is turned on (an
individual is identified with an elec-
tronic key):
The driving positions can be automati-
cally recalled for each registered
driver by registering electronic key
assignments in My Settings.
z Driving position registration proce-
dure
When the shift lever is shifted to P after
driving the vehicle, the current driving
position will be recorded.
z Driving position recall procedure
Carry only the key that has been
assigned and registered in My Set-
tings, and then unlock and open the
driver’s door using the smart entry
& start system or wireless remote
control.
The driving position other than the steering
wheel and head-up display (if equipped)
will move to the recorded position. How-
ever, the seat will move to a position
slightly behind the recorded position in
order to make entering the vehicle easier.
If the driving position is in a position that
has already been recorded, the driving
position will not move.
Turn the engine switch to ACC or
ON.
The seat, steering wheel and head-up dis-
play (if equipped) (only when the engine
switch is in ON) will move to the recorded
position.
z Memory recall function cancelation
procedure
Initialize the driver registered settings in
My Settings.
For information on initializing driver regis-
tered settings, refer to the “Multimedia
Owner’s Manual”.
Q When My Settings is turned on (to
identify an individual with finger-
print information) (vehicles with
fingerprint authentication system):
The driving position can automatically
be recalled for each registered driver
by registering fingerprint information
on the fingerprint authentication sys-
Recalling a driving position auto-
matically when getting in the
vehicle (memory recall function)
To Next Page
Loading...
