5
5-6. Using the other interior features
Interior features
Q Programming HomeLink
®
Steps
through
must be performed
within 60 seconds, otherwise the
HomeLink
®
indicator light will stop
flashing and programming will not be
successfully completed.
Press and release the HomeLink
®
button you want to program and
check that the HomeLink
®
indica-
tor light flashes (orange).
Point the remote control transmit-
ter for the device at the rear view
mirror, 25 to 75 mm (1 to 3 in.)
from the HomeLink
®
buttons.
Keep the HomeLink
®
indicator light in
view while programming.
X Vehicles with inside rear view mir-
ror
X Vehicles with Digital Rear-view
Mirror
X Garage door opener type A
Press and hold the remote control
transmitter button until the
HomeLink
®
indicator light
changes from slowly flashing
orange to rapidly flashing green
(rolling code) or continuously lit
green (fixed code), then release the
button.
X Vehicles with inside rear view mir-
ror
To Next Page
Loading...
