Lexus LX600 2021 - Page 306

305
4
4-5. Using the driving support systems
Driving
cruise control.
2
Accelerate or decelerate, with
accelerator pedal operation, to the
desired speed (at or above approx-
imately 30 km/h [20 mph]) and
press the “-SET” switch to set the
speed.
Cruise control “SET” indicator will come
on.
The vehicle speed at the moment the
switch is released becomes the set speed.
To change the set speed, operate the
“+RES” or “-SET” switch until the
desired set speed is displayed.
1
Increases the speed
2
Decreases the speed
Fine adjustment: Press the switch.
Large adjustment: Press and hold the
switch to change the speed, and release
when the desired speed is reached.
The set speed will be increased or
decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph)
*1
or 1 mph (1.6 km/h)
*2
each time the
switch is operated.
Large adjustment: The set speed can
be increased or decreased continually
until the switch is released.
*1
: When the set speed is shown in “km/h”
*2
: When the set speed is shown in “MPH”
Adjusting the set speed
Canceling and resuming the
constant speed control