4
4-5. Using the driving support systems
Driving
Display off button
Changes the screen back to the previously displayed screen, such as the audio screen.
Display mode switching button
Switches display mode every time touch the button.
Under vehicle terrain view (rear wheel) selection button
Switch the under vehicle terrain view (rear wheel) & dual side views (oP.360)
Automatic display mode selection button
oP.357
Setting button
Changes settings, such as the automatically display cornering view, the vehicle body color,
the Lexus parking assist-sensor detection distance. (oP.390)
In addition to screen switching by
operating the VIEW switch, automatic
display mode is available. In this mode,
the screen is switched automatically in
response to vehicle speed.
In automatic display mode, the monitor
will automatically display images in the
following situations:
z When the shift lever is shifted to N
or D position.
z When vehicle speed is reduced to
approximately 10 km/h (6 mph) or
less.
Q Front view & dual side views display
The screen can be displayed when the shift
lever is in P, D or N.
Lines indicating current vehicle and tire position are displayed in a composite view
on an image taken behind the current vehicle position and assists the driver to
check conditions underneath the vehicle or determine the position of the front
tires.
To display the screen, press the VIEW switch when the shift lever is in the P, D or N
position.
z It is necessary to drive a certain distance or more for the image to be displayed.
z If the under vehicle terrain view display is selected while the screen is displayed,
the screen switches from normal to magnified display. (Selecting the display
again returns the screen to the normal display)
M
N
O
P
Q
Automatic display mode
Under vehicle terrain view & dual side views
To Next Page
Loading...
