5
5-3. Using the air conditioning system and defogger
Interior features
Left-hand side airflow mode control switch
Fan speed control switches
Right-hand side airflow mode control switch
“OPTION” switch
“REAR” switch (oP.465)
“FRONT” switch
“SYNC” switch
“A/C” switch
Q Adjusting the temperature setting
Operate the temperature control
switches on the air conditioning con-
trol panel upwards to increase the tem-
perature.
Operate the temperature control
switches on the air conditioning con-
trol panel downwards to decrease the
temperature.
If the switch is pressed and held, the tem-
perature will continuously change.
If the indicator on the “A/C” switch does
not illuminate, the system will blow ambient
temperature air or heated air.
Q Adjusting the fan speed setting
Select the fan speed control switch on
the air conditioning control screen to
increase the fan speed.
Select the fan speed control switch on
the air conditioning control screen to
decrease the fan speed.
The fan speed is shown on the display. (7
levels)
Press the “OFF” switch on the air condi-
tioning control panel to turn the fan off.
Q Change the airflow mode
Select the airflow mode control switch
on the air conditioning control screen.
The airflow mode changes each time the
switch is selected.
: Air flows to the upper body
: Air flows to the upper body and
feet
: Air flows to the feet
: Air flows to the feet and the wind-
shield defogger operates
Q Switching between outside air and
recirculated air modes
Operate the outside/recirculated air
mode switch on the air conditioning
control panel.
The mode switches between outside air
mode, automatic mode (if equipped) and
recirculated air mode each time the switch
is operated.
When the system is switched to automatic
mode, the air conditioning system oper-
ates automatically according to the outside
air condition.
A
B
C
D
E
F
G
H
To Next Page
Loading...
