6
6-3. Do-it-yourself maintenance
Maintenance and care
Open the AdBlue™ tank cap.
Insert a bottle of AdBlue™ and fully
tighten it.
Push down on the bottle.
AdBlue™ will begin to be refilled. Refill
AdBlue™ slowly so that it does not spill. Do
not remove the bottle until it is empty.
Check that no AdBlue™ remains in
the bottle, and then remove it.
Repeat steps 3 to 5 until approximately
7.0 L (7.4 qt., 6.2 Imp.qt.) or more of
AdBlue™ have been refilled.
Close the AdBlue™ tank cap.
Turn the cap until you hear a click.
Check that the engine starts.
The way of refilling may differ from
those shown in the illustration.
Q Refilling AdBlue™
O Use AdBlue™ (compliant with ISO
22241-1).
AdBlue™ is a trademark of the German
Association of the Automotive Industry
(VDA).
O Before driving for a long period of time in
an area where AdBlue™ cannot be
refilled, consult your Lexus dealer.
Q When refilling AdBlue™
After refilling AdBlue™, the engine may
take a few seconds longer than normal to
start.
To Next Page
Loading...
