8-2. Customization
Q AHS (Adaptive High-beam System)
*1
(oP.246)
*1
: If equipped
*2
: Only high beam will be turned on or off.
*3
: For vehicles without model code
*5
that has “W” as the last letter
*4
: For vehicles with model code
*5
that has “W” as the last letter
*5
: The model code is indicated on the manufacturer’s label or the Certification Regulation
label. (oP.623)
Function Default setting
Customized set-
ting
Adaptive High-beam System On
Off
*2
– – O
Clearance between a vehicle
ahead and the shaded high beams
Wide
Narrow
– – O
Standard
Brightness and illuminated area
adjustment of the high beams
according to the vehicle speed
Operates at
approximately 15
km/h (9 mph) or
more
Operates at
approximately 30
km/h (19 mph) or
more
– – O
Operates at
approximately 40
km/h (25 mph) or
more
*3
, or 60
km/h (37 mph) or
more
*4
Intensity adjustment of the high
beams when driving around a
curve (illuminates the area in the
direction vehicle is turning more
brightly)
On Off – – O
Projection distance adjustment of
the low beams according to the
distance to a preceding vehicle
On Off – – O
High beam light distribution con-
trol for rain
On Off – – O
Light distribution control for urban
areas
On Off – – O
To Next Page
Loading...
