1-2. Child safety
Q Child restraint system compatibil-
ity for each seating position
Compatibility of each seating position
with child restraint systems (oP.65)
displays the type of child restraint sys-
tems that can be used and possible
seating positions for installation using
symbols.
Check the selected child restraint sys-
tem together with the following
[Before confirming the compatibility of
each seating position with child
restraint systems].
Q Before confirming the compatibil-
ity of each seating position with
child restraint systems
Checking the child restraint system
standards.
Use a child restraint system that
conforms to UN(ECE) R44
*1
or
UN(ECE) R129
*1, 2
.
The following approval mark is dis-
played on child restraint systems
which are conformed.
Check for an approval mark
O Use a child restraint system suitable to
the age and size of the child and install
it to the rear seat.
O If the driver’s seat interferes with the
child restraint system and prevents it
from being attached correctly, attach
the child restraint system to the right-
hand rear seat (left-hand drive vehi-
cles) or the left-hand rear seat (right-
hand drive vehicles).
O Adjust the front passenger seat so that
it does not interfere with the child
restraint system.
O When installing a child restraint sys-
tem on the second center seat (if
equipped), adjust both seat cushions
to the same position and align both
seatbacks at the same angle. The seat-
backs must be adjusted to the same
angle. Otherwise, the child restraint
system cannot be securely restrained
and this may cause death or serious
injuries in the event of sudden braking,
sudden swerving or an accident.
O Child restraint system installed on the
third seat (if equipped) should not con-
tact the second seatbacks.
Child restraint system compati-
bility for each seating position
(except for ASEAN countries
and Latin American and the
Caribbean countries)
To Next Page
Loading...
