Chapter 1 Product Description
1
1 Product Description
1.1 Description
The Loop-IP6610 Router provides connectivity from 10/100 BaseT to E1, DS1, DTE, or DCE interface in a
small metal box. This unit is a low cost access router with an E1/FE1(or DS1/FDS1) line interface and a
10/100 Ethernet interface.
The Loop-IP6610 supports multiple routing protocol including static route, RIP I, RIP II, and multiple WAN
link layer protocol including PPP and HDLC. It is perfect for small and medium sized businesses (SMBs)
using it as an access WAN router. The Loop-IP 6610 integrates E1/DS1 CSU/DSU and an optional built-in
single port Ethernet switch to provide cost effective access solution for SMBs or branch offices. It also
supports a user-friendly Command Line Interface (CLI), an SNMP management interface and user-friendly
web management.
The Loop-IP6610 Router supports a DB9S console port, which allows users to execute in-service
diagnostics and fault isolation from a local or remote terminal. The Loop-IP6610 Router also allows remote
site to Telnet communication via the Ethernet port or the WAN port. The IP6610 Router provides
multicolored LED indicators on the front panel and an ACO (Alarm Cut-Off) button.
Figure 1-1 Loop-IP 6610
To Next Page
Loading...
Need help?
General
