Loop Telecom IP6610 User Manual

Chapter 5 Loop-IP6610 Setup
23
Set Com Port to whichever Com Port you are connected to on your VT-100 monitor. Then select your other
settings from Table 5-1 below.
Table 5-1 VT-100 Monitor Parameters Default Setting
Item Options Default
Baud 38400, 19200, 9600, 2400, 1200 9600
Data Bit 8, 7 bit per byte 8
Stop Bit 2, 1 bit 1
Parity Bit NONE, EVEN, ODD NONE
After selecting your settings left-click your mouse on OK. The setup screen will disappear.
To save your setup, left-click Save setup with your mouse, as shown in the screen below.
You can save the setup in any directory you choose. For the sake of convenience we saved our setup in the
Loopterm file on our desktop.
5.2 Login, Password, Save, Logout, and Reset
Once your system is installed and powered up, the initial VT-100 monitor screen will be blank. Key in the
command login admin. Then press Enter. The following screen will show.

Loop Telecom IP6610 Specifications

General

Brand	Loop Telecom
Model	IP6610
Category	Network Router
Language	English