Loop Telecom IP6610 - 2 Loop-Ip6610 Installation; Main Board Jumper Selection; DS1-Inband; Figure 2-10 Daughter Board Jumper3 Selection

Chapter 2 Loop-IP6610 Installation
6
JP8 JP6 JP4 JP2JP1
JP9 JP7 JP5 JP3
JP10
Figure 2-10 Daughter Board Jumper3 Selection
Figure 2-10, above, illustrates jumper3 selection on the Daughter Board. All settings are made at the factory
in accordance with the customer’s order.
The table below shows the jumper3 definition.
Table 2-11 Jumper3 Definition
JP2 JP4 JP6 JP8 JP10
Jumper 3
Selection
JP1 JP3 JP5 JP7 JP9
2.6.1 DS1
OFF ON ON ON OFF
V35
ON ON ON OFF ON
V36
ON ON ON OFF OFF
EIA530
ON ON OFF ON ON
X21
ON ON OFF ON OFF
RS232
ON ON OFF OFF ON
RS422
ON ON OFF OFF OFF