Magtrol DSP7000 - How to SET the TM;TF INVERT Flag; Figure 6-7 Torque Invert Flag Screen

63
Magtrol Model DSP7000 Dynamometer Controller
Chapter 6 – Manually Controlled Operation
OPERATION
6.8 HOW TO SET THE TM/TF INVERT FLAG
1. See Section 3.2.1 - Dynamometer Configuration. When the TM/TF torque sensor is chosen,
after the max torque screen, the TM/TF torque reading invert flag screen will be displayed
as in Figure 6–7 Torque Invert Flag Screen.
POWER
BRAKE STATUS SET POINT SET POINT PID
TORQUE SPEED USER DISPLAY
TM/TF TORQUE INVERT?
XXX

Figure 6–7 Torque Invert Flag Screen
2. Press SCALE I button to select yes or no.
3. Press SHIFT three times to complete configuration and return to the main menu.