ELECTRIC SYSTEM 16000 SERVICE/MAINTENANCE MANUAL
3-44
Published 05-09-17, Control # 014-28
Jacking Accessory Diagnostic Screen
Select crane carbody with jacking icon in screen level 1 as
shown in Figure 3-27
. Press Enter button to go to level 2.
At jacking accessory diagnostic screen component icons are
displayed as shown in Figure 3-18
. In the following example,
all jack switch on wireless remote is selected. The crane on
jacks icons indicate crane level status.
Pins and Fan Accessory Diagnostic Screen
Select crane, pins, and engine fan icon in screen level 1 as
shown in Figure 3-19
. Press Enter button to go to level 2.
For counterweight pins, boom hinge pins, front/rear rotating
bed
pins, and engine fan screen see Figure 3-20. In the
following example, the left front
rotating bed pin on wireless
remote is selected. Fan status views are shown in
Figure 3-20
and Figure 3-21 for current and past production.
D16-11
Diagnostic Screen
Accessory Jacking Selected
FIGURE 3-17
FIGURE 3-18
Accessory Jacking
(Jacking All Selected)
D16-12
FIGURE 3-20
D16-14
Accessory
(Rotating Bed Pins Selected)
Fan Status for s/n
16001141 and prior
FIGURE 3-21
Fan Status for s/n
16001142 and newer
To Next Page
Loading...
