Driving
5.6 Heating and air-conditioning system
Operating Manual GMK6300L 3 112 xxx en 5 - 83
xx.xx.xxxx
• Set the current time on the flashing display – button (1) or (2), e.g. 14:00.
• Wait for 5 seconds. The new time is saved and then the weekday flashes,
e.g. MO for Monday.
• Set the current day of the week on the flashing display.
After 5 seconds, the display stops flashing and the current time is displayed.
The weekday goes out.
The time and weekday have now been set.
Saving automatic
heating start
Heating is started automatically on schedule only if the time and the day of
the week have been correctly set;
à p. 5 - 82.
You can set three different automatic heating starts – up to seven days in
advance.
H
If you call up values in order to change them during the following setting
process, they flash for 5 seconds. The entry must be made within this
period. The value stops flashing after 5 seconds and is saved as the new
value.
• To retrieve a storage location, press the button (1) once.
The following flash:
– The retrieved storage location, e. g. 2
– The last saved heating start, e.g. 06:00.
• Set the time for the desired heating start – button (1) or (2), e.g. 08:00.
s
To Next Page
Loading...
Need help?
General
