Driving modes
6.2 Weighing the truck crane
6 - 8 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
– Determining the axle loads
All the axle lines belonging to an axle group must always be weighed. In
addition, all the wheels must be on the same level. If, for instance, only
the axle group A1 is to be weighed, then the axle groups A2 and A3 must
be equalised on a support plate U which has the same height as the scales
W1 and W2.
Axle groups
GMK6300L
– Axle group 1 1. + 2. axle lines
– Axle group 2 3. + 4. axle lines
– Axle group 3 5. + 6. axle lines
To Next Page
Loading...
