Driving modes
6.4 Main boom, removing/installing
6 - 44 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
• Connect the hoses (2) to the connections (1)
(match the markings).
• Hold the hoses.
• Release the locking device (3).
• Hang the hoses (4) at the slinging points (1)
and (2) on the main boom.
• Check the connections for leaks.
Removing Depending on the driving mode, the hose drum must be removed before
driving on the road.
• Remove the hoses (4) from the holders (1)
and (2) on the main boom.
• Hold the hoses tightly and guide them to the
hose drum.
G
Risk of accidents from hoses springing back!
If you detach the hoses after the locking device has been released, do not
under any circumstances let go of the hoses before the locking device has
been engaged. Otherwise the hoses will retract uncontrollably and can
injure people or damage parts of the truck crane.
To Next Page
Loading...
Need help?
General
