Operating elements for crane operation
9.2 Short description of the operating elements
9 - 96 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
Input confirmation
The lamp (1) lights up.
Acknowledgement
The lamp (1) lights up.
RCL early warning
RCL switch-off
Sensor for brightness
Registers the brightness of the operating environment. The brightness of all
displays is automatically adjusted;
à p. 11 - 22.
– In the Rigging mode
submenu:
Press button once –
Rigging mode monitor-
ing
submenu opens
– In the Rigging mode
monitoring submenu:
Press button once – rigging mode is
accepted,
Monitoring submenu opens,
lamp (1) goes out
– Press the button
once:
Buzzer tone off, error message acknowledged
– Flashing: Degree of utilisation 90 – 100% – buzzer tone on
–On: Degree of utilisation approx. 100% – buzzer tone on –
shutdown
– Off: Degree of utilisation 0 – 90%
à p. 11 - 37
–On: Shutdown – buzzer tone on
– Degree of utilisation approx. 100% or
–Error
– Off: No shutdown
à p. 11 - 37
To Next Page
Loading...
Need help?
General
