Crane operation
11.3 Crane operation with main boom
Operating Manual GMK6300L 3 112 xxx en 11 - 85
xx.xx.xxxx
If symbol (1) is still flashing after approx.
10 seconds, this means that the locking pins
are under load.
• Release the control lever.
To relieve the load, carefully retract and
extend a little.
If removing the load does not cause unlocking, you must lock the telescopic
section (
à p. 11 - 87) and restart unlocking.
s
S
Risk of damage to the boom system!
If extending and retracting several times does not lead to the lock being
released, you must not telescope any further against the stop.
To Next Page
Loading...
Need help?
General
