Micromeritics TRISTAR II PLUS - Page 124

7 About Reports
Selections Description
Center Line. Displays placement options for the center line in the
graph. Select Entered to specify placement of the line or Mean to
place the center line at the calculated mean value for the selected
samples.
Limit Lines.Displays limiting lines options. Lines can be placed at
some multiple of the standard deviation or at specified positions
(Entered). When Entered is selected, enter the High limit and Low
limit fields with appropriate values.
Recalculate archived
SPC results [checkbox]
If selected, SPC results are archived in the sample files when a
report is generated. If deselected, previously archived results are
used to save time when generating reports. Since this option
updates and saves sample files, do not use it with sample files that
need to remain compatible with other applications.
Report [button]
Generates the report.
Samples [button]
Select additional sample files to add to the report.
Show graphic
[checkbox]
Use to show a graphic on the report header.
Height/Width. Enter the height and width of the selected graphic.
These values determine the graphic's appearance on the generated
report.
Show report title
[checkbox]
Select then enter a report title to appear on the report header.
Tabular report
[checkbox]
Generates a tabular report of the included samples that contains the
numeric values contributed by each sample.
Control Chart Report (continued)
7 - 8
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023