Micromeritics TRISTAR II PLUS - Page 188

8 Selected Report Options
Selections
Description
Select Reports
[groupbox]
Freundlich Isotherm plot. Plots the absolute pressure vs quantity
adsorbed. Shows best fit line.
n
Autoscale x-axis. Linear x-axes begin at zero. The x-axis field
shows the absolute pressure.
n
Autoscale y-axis. y-axes begin at zero. The y-axis field shows
the quantity of gas adsorbed.
n
Overlay samples. Use to overlay sample files on the Freundlich
isotherm plot.
Freundlich Transform plot. Plots the log(P) vs log(Q) and the best
fit.
n
Autoscale x-axis. The x-axis field shows the absolute pressure.
n
Autoscale y-axis. The y-axis field shows the quantity of gas
adsorbed.
n
Overlay samples. Use to overlay sample files on the Freundlich
transform plot.
Tabular report. Select to include pressure points included in the
report.
Specify monolayer
capacity [selection]
Select and enter the monolayer capacity of the sample.
Tabular report
[selection]
Use to have a report of the pressure points generated.
For fields and buttons not listed in this table, see Common Fields and
Buttons on page2 - 3.
Freundlich Report (continued)
8 - 30
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023