Micromeritics TRISTAR II PLUS User Manual

Selections
Description
Select Reports
[groupbox]
Tabular Report. Generates a tabular report of the included samples
that contains the numeric values contributed by each sample.
Temkin Isotherm plot. Overlays the Temkin isotherm with the
analysis data.
n
Autoscale x-axis. Linear x-axes begin at zero. The x-axis field
shows the absolute pressure.
n
Autoscale y-axis. y-axes begin at zero. The y-axis field shows
the quantity of gas adsorbed.
n
Overlay samples. Use to overlay sample files on the isotherm
plot.
Temkin Transform plot. Plots a linear form of the Temkin
transform plot.
n
Autoscale x-axis. The x-axis field shows the logarithm of pres-
sure (ln).
n
Autoscale y-axis. The y-axis field shows the quantity of gas
adsorbed.
n
Overlay samples. Use to overlay sample files on the transform
plot.
Specify differential heat
of adsorption
[checkbox]
Select and enter the differential heat of adsorption at zero surface
coverage. This allows inclusion of all Temkin constants.
Specify monolayer
capacity [checkbox]
Select and enter the monolayer capacity of the sample.
For fields and buttons not listed in this table, see Common Fields and
Buttons on page2 - 3.
Temkin Report (continued)
Temkin Report
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
8 - 55

Micromeritics TRISTAR II PLUS Specifications

General

Brand	Micromeritics
Model	TRISTAR II PLUS
Category	Measuring Instruments
Language	English