Micromeritics TRISTAR II PLUS - Page 255

24 ['{:d}'.format(n_ads),
25 '{:8.3f}'.format(warm_fs) + ' cm³',
26 '{:8.3f}'.format(cold_fs) + ' cm³',
27 '{:8.3f}'.format(mass) + ' g',
28 desc,
29 '{:8.3f}'.format(Tanl) + ' K',
30 '{:8.3f}'.format(dens) + ' g/cm³' ] )
31
32 csa, hsd, dcf, mol_weight, analysis_gas = mic.adsorptive_data()
33
34 mic.summary.add("Adsorptive Data",
35 ["Cross sectional area:",
36 "Hard sphere diameter:",
37 "Density conversion factor:",
38 "Molecular weight:",
39 "Analysis gas:" ],
40 ['{:8.3f}'.format(csa) + ' nm²',
41 '{:8.3f}'.format(hsd) + ' Å',
42 '{:8.3f}'.format(dcf),
43 '{:8.3f}'.format(mol_weight),
44 analysis_gas ] )
Note the calls to mic.isotherm and mic.adsorptive_data above are each returning results as a list
with elements of varying return type.
Acquire Basic Information
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
A - 11