Micromeritics TRISTAR II PLUS - MicModule Python Calls; Get Adsorptive Data for Each Sample via Python

A Advanced Reports - Python Module
Get Adsorptive Data for Each Sample
1 mic.adsorptive_data(sample_number=0):
2
3 Get adsorptive data for each sample
4
5 Keyword arguments:
6
7 sample_number --- Identifier for the adsorptive data to retrieve
8 0: current sample file (default)
9 1 through 8 : corresponding overlay sample
file
10
11 Usage:
12
13 csa, hsd, dcf, mol_weight, analysis_gas = mic.adsorptive_data()
14 csa, hsd, dcf, mol_weight, analysis_gas = mic.adsorptive_data(0)
15
16 csa--- cross sectional area (nm^2)
17 hsd--- hard sphere diameter (angstroms)
18 dcf--- density conversion factor (dimensionless)
19 mol_weight--- molecular weight
20 analysis_gas --- mnemonic for the analysis gas species
21 (e.g., 'CO', 'H2')
A - 26
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023