Micromeritics TRISTAR II PLUS - MicModule Python Calls; Get Report Results via Python

A Advanced Reports - Python Module
Get Report Results
This script gets report results for the indicted report and sample:
1 mic.report(report_name='', result='', sample_number=0):
2
3 Get report results for the indicated report and sample
4
5 Keyword arguments:
6
7 sample_number --- Identifier for the sample data to retrieve.
8 0: current sample file (default)
9 1 through 8 : corresponding overlay sample file
10
11 Usage:
12
13 sa= mic.report('bet', 'surface area')
14
15 porew, incvol, desc = mic.report('bjhads',
16 'incremental distribution')
17
18 The available report keywords, result keywords and a corresponding
19 description of the result is listed in the table below
20
21 ReportResultDescription
22 ------------------------------------
23 betsurface areaSurface area (m^2/g)
24 betbet constantBET constant (dimen-
sionless)
25 betmonolayer capacityMonolayer capacity
(cm^3/g)
26 tplotexternal surface areaExternal surface area
(m^2/g)
27 tplotmicropore volumeMicropore volume (cm^3/g)
A - 28
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023