Micromeritics TRISTAR II PLUS - Page 31

Selections
Description
Replace All
Selects another .SMP file where the values will replace all values for
the active sample file. The original file will remain unchanged. No
analysis data is added to the file. The only information added is sample
information, material properties, liquid properties, analysis, and
reporting parameters.
Report
Displays a window to specify report output options.
Save
Saves changes.
Save As
Saves a file in the active window under a different file name. A portion
can be saved as a separate, stand-alone file, such as Analysis Condi-
tions or Report Options, when saving sample information.
Start
Starts the report, test, analysis, or operation.
Start Date
Displays a calendar to select the start date for the report.
View
Operation. Displays the data from the current analysis.
Instrument Log. Displays recent analyses, calibrations, errors, or
messages. Enabled only in Service Test Mode.
Instrument Schematic. Displays a schematic of the analyzer system.
Common Fields and Buttons (continued)
Common Fields and Buttons
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
2 - 5