Micromeritics TRISTAR II PLUS - Sample Files Management; Import Manually Entered Data

IMPORT MANUALLY ENTERED DATA
When importing isotherm data from an external ASCII text file using the Import button on the
interactive window, the ASCII text file must use the following rules:
ASCIItext file format rules
Data must be in two columns and separated by a comma or white-space. Acceptable column
headings are:
n
Relative Pressure
n
Absolute Pressure (mmHg)
n
Absolute Pressure (kPa)
n
Absolute Pressure (mBar)
n
Quantity Adsorbed (mmol/g)
n
Quantity Adsorbed (cm³/g STP)
n
Quantity Adsorbed (cm
3
/g STP)
Sample Physisorption ASCIIText File
Silica Alumina : Adsorption
Relative PressureQuantity Adsorbed (cm3/g STP)
0.10862950.6657
0.2228860.7813
0.33990971.3095
0.45951284.4172
0.577447102.672
0.654583121.707
0.760074179.096
0.855713334.565
0.958511394.675
0.996251403.793
Silica Alumina : Desorption
Relative PressureQuantity Adsorbed (cm3/g STP)
0.996251403.793
0.86016389.626
Manually Enter Data
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
3 - 9