Selections Description
Equilibration [button]
Provides options to specify the equilibration interval and delay time.
(Column heading reads Absolute Pressure (mmHg) when Absolute
Pressure Dosing is selected.)
Minimum equilibration delay at p/po > = 0.995. The minimum
number of seconds required before equilibration can occur for a
relative pressure greater than or equal to 0.995. This field is not
available if Absolute pressure dosing is selected on the Analysis
Conditions tab.
Relative Pressure (p/p
o
) or Absolute Pressure. The pressure the
equilibration interval will be applied.
Free Space [button]
Use to enter the free space measurement type.
Measure:
n
Lower Dewar for evacuation. If the Dewar is to be lowered for
evacuation, select this option and enter the length of time for evac-
Analysis Conditions (continued)
Analysis Conditions
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
4 - 7
To Next Page
Loading...
