Micromeritics TRISTAR II PLUS - Page 87

Selections
Description
Use isothermal jacket
[checkbox]
Select if an isothermal jacket is to be used. An isothermal jacket main-
tains a constant temperature profile along the sample tube stem during
an extended analysis of more than 1 or 2 hours.
Vacuum seal type
[groupbox]
Select the seal type to be used.
For fields and buttons not listed in this table, see Common Fields and
Buttons on page2 - 3.
Sample Tube (continued)
Sample Tube
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
4 - 19