Milnor MilTouch - Enable an Ethernet Connection

26
Pellerin Milnor Corporation
a. Enter today’s month, day, and year.
b. Touch
to save your changes and return to the System Settings display.
2. Touch the button labelled Time on the System Settings display. The System Time window
(not shown) appears. In the System Time window:
a. Enter the current time in 24-hour format.
b. Touch
to save your changes and return to the System Settings display.
2.2.4 Enable an Ethernet Connection
BNCLJP03.C01 0000200611 E.2 F.2 8/20/20 4:43 PM Released
If your MilTouch™ machine is part of a Mildata
®
network, the MilTouch™ controller must have
a Cat 5 Ethernet connection with the Mildata
®
computer and you must enable this connection in
order for the machine to communicate with the Mildata
®
computer.
To enable the connection, touch the button labelled DHCP on the System Settings display so that
it displays
YES to enable DHCP or NO to disable DHCP.
• Enable DHCP and the server will automatically assign an IP address to your machine.
• Disable DHCP to manually assign a static IP address to your machine.
– If the Mildata
®
network is tied to your wireless network, your network administrator must
provide the static IP information.
– If the Mildata
®
network is isolated to your Milnor
®
equipment, a Milnor
®
technician must
provide the static IP information.
Configuration