Milnor MilTouch - To Change the Number of a Wash Formula; To Change a Wash Formula

Pellerin Milnor Corporation 29
2. Touch the button that displays the wash formula name (Fn).
3. Touch
to delete the formula.
4. A dialog box (not shown) appears, which prompts you to confirm your decision. On the dia-
log box, touch
to delete the formula.
NOTE: Formula numbers are not sequential. For example, if you delete formula #2, for-
mula #3 will remain #3 and there will be no formula #2.
3.1.1.4 To Change the Number of a Wash Formula
BNCLJO06.T25 0000200751 E.2 B.3 D.3 1/2/20 1:22 PM Released
Change the number assigned to a wash formula.
1. Use
and on the Wash Formula Maintenance display if necessary to scroll be-
tween pages and show the wash formula you want, or use
to search for the wash for-
mula by its formula number.
2. Touch the button that displays the formula number (F#). The Change Formula Number win-
dow (not shown) appears. In the Change Formula Number window:
a. Touch the backspace button to delete the formula number that the controller provided.
b. Use the keypad to enter a new formula number. The controller will not accept a formula
number that is already in use.
c. Touch
to save the new formula number.
3.1.1.5 To Change a Wash Formula
BNCLJO06.T03 0000194244 E.2 B.3 D.3 1/2/20 1:22 PM Released
Change the step decisions or the number of steps in a wash formula.
1. Use
and on the Wash Formula Maintenance display if necessary to scroll be-
tween pages and show the wash formula you want, or use
to search for the wash for-
mula by its formula number.
2. Touch the button that displays the wash formula name (Fn).
3. Touch the button that displays the number of steps (S) to the right of the wash formula name
to view the display shown in the following figure. This display is subsequently referred to as
the Steps in a Wash Formula display.
Formula Maintenance