Milnor MilTouch - Table 9 Outputs on 24-Output Board #2

82
Pellerin Milnor Corporation
Table 8 Outputs on 24-Output Board #1 (cont'd.)
Output #
(Board)
Output #
(Display)
Connections on
Board
Function
Description
17 25 1MTA14-10 & 14-16 T'fer Control #1
Used to transfer control
of Staph Guard
®
machines.
18 26 1MTA14-10 & 14-7 T'fer Control Not #1
Used to transfer control
of Staph Guard
®
machines.
19 27 1MTA14-10 & 14-17 T'fer Control #2
Used to transfer control
of Staph Guard
®
machines.
20 28 1MTA14-10 & 14-8 T'fer Control Not #2
Used to transfer control
of Staph Guard
®
machines.
21 29 1MTA14-10 & 14-18
Clean Signal
Actuate to sound the op-
erator signal on clean side
of Staph Guard
®
machines.
22 30 1MTA14-10 & 14-9 Wash Clutch
On multi-motor ma-
chines, this output en-
gages the wash motor to
the cylinder drive.
23 31 1MTA14-10 & 14-19
Spraydown
On divided-cylinder ma-
chines, actuate this output
to activate spraydown
and wet the goods during
loading.
Table 9. Outputs on 24-Output Board #2
Output #
(Board)
Output #
(Display)
Connections on
Board
Function
Description
0 40 2MTA13-1 & 13-11 Chemical 14
Actuate to inject chemical 14.
1 41 2MTA13-2 & 13-12 Chemical 9
Actuate to inject chemical 9.
2 42 2MTA13-3 & 13-13 Chemical 13
Actuate to inject chemical 13.
3 43 2MTA13-4 & 13-14
Chemical
Flush
Actuate to open the flush valve
for chemicals.
4 44 2MTA13-5 & 13-15 Chemical 15
Actuate to inject chemical 15.
5 45 2MTA13-6 & 13-16 Chemical 11
Actuate to inject chemical 11.
6 46 2MTA13-7 & 13-17 ChemSave
Used to interface with chemi-
cal dispenser systems to con-
trol which machines get
chemicals delivered.
Troubleshooting