10
Pellerin Milnor Corporation
• The Home display is the default display. It appears when no other display has been accessed,
when you touch
from another display, or when you return to the Home display with
or .
• Access a display from the less-indented (parent) display above it. The icon following the dis-
play name is the button on the parent display that accesses it. Example: Touch
on the
Home display to access the Data Transfer display.
• Display names in parentheses are implied; that is, the name does not appear on the display.
• The term “display” refers to the view that remains active until you access another display.
Many other windows and dialog boxes, not shown here, will appear only until you make a se-
lection or complete an entry. Example: the User Password Window.
Table 2. The MilTouch-EX™ WTB Display Hierarchy
Display Name and Button
See
(Home)
Figure 1: The Home Display, page
8
(Run)
or
Section 1.1.3 : When a Formula is
in Progress (The Run Display),
page 9
Error Causes/Solutions
Figure 25: Error Causes/Solutions
Display, page 55 (only available
when the machine encounters an
error)
Manual Override
Section 4.4 : Manual Mode, page
56
(The Recovery Display, Loading and Dis-
charging States)
Figure 2: Example Loading State,
page 9 (see operator guide)
(Data Transfer)
Section 5.2 : Data Transfer with
the MilTouch™ Controller, page
96
(Wash Formula Maintenance)
Section 3.1.1 : The Wash Formula
Maintenance Display, page 27
(Steps in a Wash Formula) (touch the num-
ber of steps on the parent display)
Section 3.1.1.5 : To Change a
Wash Formula, page 29
(Step Decisions) (touch the step
type on the parent display)
Section 3.1.1.9 : To Modify a
Step, page 32
Configuration
Section 2.1 : Machine Configura-
tion, page 12
SYSTEM SETTINGS
Section 2.2 : System Settings,
page 23
Preface
To Next Page
Loading...
