Milnor MilTouch - Data Transfer with the Miltouch Controller; Table 13 Example of Directory and File Structure after Data Transfer

96
Pellerin Milnor Corporation
Table 13 Example of Directory and File Structure After Data Transfer (cont'd.)
Directory or File Description
Test_Formulas.set An example directory that contains a formula set in development.
The directory name before the .set extension is the name you as-
signed to this formula set.
f-001
Directories that hold the individual formula data—one per formu-
la. Only directory f-010 is expanded to show its content.
...
f-010
s-001_chems.dat
Proprietary files that hold the data for the steps in this formula.
These files are accessible only by the controller and the PC pro-
grammer application.
s-004_chems.dat
steps.dat
formulas.dat A proprietary file that holds data for all formulas. This file is ac-
cessible only by the controller and the PC programmer application.
BNCLJP05 / 2020465
BNCLJP05 0000199990 11/12/20 9:58 AM Released
5.2 Data Transfer with the MilTouch™ Controller
BNCLJO06.C10 0000187102 E.2 F.5 11/6/20 2:10 PM Released
NOTE: If you are using the MilTouch™ PC programmer application, see Section 5.3 :
Data Transfer with the MilTouch™ PC Programmer Application, page 101.
From the Data Transfer display, you can export wash formula sets from the MilTouch™ ma-
chine controller to a USB flash drive for sharing. You can also export wash formula sets and con-
figuration files to a USB device or SD card to keep as backup data.
Touch
on the Home display on the controller to show the Data Transfer display.
The following figure illustrates how the Data Transfer display appears on the MilTouch™ con-
troller. In the following figure, these definitions apply:
internal pertains to a data storage location that only the controller can use. Changes you make
in the Configuration and Wash Formula Maintenance displays apply to the data at this
location.
external pertains to the root of the USB flash drive or on the storage partition of the controller’s
SD card.
export copy data from the internal to an external data storage location.
import copy data from an external to the internal data storage location.
Data Transfer