Chapter 3 Adjustment > Adjust Menu>Replace Head
147
11. Press the [ENTER] key to start evacuating.
• Once complete, the system automatically proceeds to the next step.
12. Loosen the tube cock and press the [ENTER] key.
Release Tubing clamp
[ENT]
13. Press the [ENTER] key to start filling.
• Once complete, the system automatically proceeds to the next step.
Fillup Wash Liquid
Start [ENT]
14. Detach the maintenance head washing unit from the damper.
15. Press the [ENTER] key to start discharge.
• Once complete, the system automatically proceeds to step 1. Clean the other head.
16. Detach the maintenance liquid bottle, maintenance head washing unit, and damper.
3
To Next Page
Loading...
