Chapter 2 Replacement of Maintenance Parts > Ink Supply Related>Damper
80
9. Detach the double damper FIT on the top of the Damper.
• Be careful to avoid bending the ink tubes.
10. Remove the Damper.
• Be careful to avoid contaminating the surrounding area with ink.
• Do not dispose of the sponge between the dampers. It will be reused later.
11. Prepare a new Damper.
(1) Remove the damper seal rubber holder.
(2) Apply maintenance liquid to the damper seal rubber holder 3 (included).
• Use the correct maintenance liquid for the ink in use.
(3) Attach the damper seal rubber holder 3 to the damper.
To Next Page
Loading...
