Information and Care of Proteus Crawlers
Pressurisation
The crawler must always be correctly lled with CO
2
or Nitrogen. The
control unit displays the internal pressure.
Cleaning
Ensure the crawler is thoroughly cleaned after each inspection. Ensure
the connectors are free from dirt and moisture. Always t the dust caps
immediately after disconnecting the crawler from the system.
Crawler wheels
For inspection in various pipe systems always use the appropriate wheel
combinations.
Maintenance
Ensure the all screw threads and connections are free from dirt.
CAUTION!
High-pressure cleaners must not be used. It can cause
considerable damage to the crawler, camera and other
system components.
Cleaning agents or solvents must not be used. These can
damage the seals and other materials on the system.
Only clean water should be used.
CAUTION!
Risk of fatal injuries caused by electrical current!
For all cleaning and maintenance work disconnect the
system from the power supply.
108
Version LMinicam Proteus
To Next Page
Loading...