Review Your Survey
n At any time, you can review the Observations in your survey. Press
and select Review Survey. This will show you each observation
you have created with the meterage displayed along with the
captured image.
End Your Survey
n To end the survey press then in the control menu that appears
select End Survey and press . You will be prompted to Conrm
End Survey by pressing .
n A summary of the Section which has just been completed is then
shown.
n If multiple surveys are being performed immediately within the same
Project, press and then press to create a New Section,
then repeat everything, starting from that New Section’s creation.
n Otherwise you can just create a report for that section if you wish to.
166
Version LMinicam Proteus
To Next Page
Loading...
