Using Motorised Cable Reel RAP200-RAP300
By default the motorised cable reel is in Automatic mode when powered
on. The motorised cable reel contains a motor which can run forwards,
reverse or stop.
When the motor is stopped. the cable drum cannot move.
Automatic Mode
In Automatic mode, the motorised cable reel controls the pay out assist
or rewinding of the cable by itself. Normally this is based upon what
direction the crawler is travelling.
Manual Mode
In Manual mode, you can control the paying out or rewinding of the
cable
yourself. This allows you to drive the crawler forward or reverse without
the cable reel motor moving.
Paying Out
When running forwards, the motorised cable reel motor does not feed
Connections
The motorised cable reel requires its own 24v power supply:
CCU
Connection
24v
PSU
74
Version LMinicam Proteus
To Next Page
Loading...