Information and Care
Pressurisation
The camera module is not pressurised.
Cleaning
Ensure the camera module is thoroughly cleaned after each inspection.
Ensure the connectors are free from dirt and moisture. Always t the
protective cap immediately after disconnecting the camera module from
the system.
Maintenance
Ensure that the camera connector is free from dirt.
CAUTION!
High-pressure cleaners must not be used. It can cause
considerable damage to the crawler, camera and other
system components.
Cleaning agents or solvents must not be used. These can
damage the seals and other materials on the system.
Only clean water should be used.
Technical Details CAM027
Product ID: CAM027
Dimensions: 63 x 52 x 52mm (L x W x D)
Power Consumption: 7W
Weight: 0.25Kg (0.55lb)
Temperature Range: -20°C ~ +50° C
Environmental Protection: Pressure Tested IP68
Internal Pressure: None
115
Version L Minicam Proteus
To Next Page
Loading...