EasyManua.ls Logo

MINICAM PROTEUS - Information and Care; Cleaning; Maintenance

MINICAM PROTEUS
196 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Information and Care
Cleaning
Ensure that the control unit is thoroughly cleaned after each inspection.
Use a damp rag when cleaning. Ensure the connectors are free from dirt
and moisture. Always t the dust caps immediately after disconnecting
the control unit from the rest of the system.
Maintenance
Ensure that all screw threads and connections are free from dirt.
CAUTION!
High-pressure cleaners must not be used. It can cause
considerable damage to the control unit, crawler, camera
and other system components.
Cleaning agents or solvents must not be used. These can
damage the seals and other materials on the system.
Only clean water should be used.
CAUTION!
The control unit is rated to IP54 providing that the external
media and expansion slot covers are tted in place.
CAUTION!
It must be noted that although the cable reel and crawler are
for use in wet environments the control unit is for indoor use
but may also be used outdoor in very light rain. The external
PSU is for indoor use only as marked on its label.
66
Version LMinicam Proteus

Table of Contents

Related product manuals