Create a New Observation
n When you come to a point in your survey where you need to create
a New Observation press which will automatically pause the
recording
and show a Control Menu. Now you can either enter the Defect Code
if you know it, or press to select Survey Code Lookup which will
give you a selection of Defect Category Folders to explore, then high
light the relevant Defect Code and press . Once you have entered
or selected your Defect Code you ll in the information it asks for.
Then press to store the New Observation with no photo or press
to store with a photo.
n Now you can continue your Survey. The system will automatically
resume recording, and after a couple of seconds the observational
text will disappear from the live picture.
NOTE!
If you move the camera before auto recording resumes you
may notice a slight jump in the video playback!
n Repeat these steps each time you wish to capture a new observation.
165
Version L Minicam Proteus
To Next Page
Loading...
