To pay out cable to the crawler
Press F1 once for a short feed.
Press F1 and hold to feed until released.
To rewind cable back onto the drum
Press F2 once for a short rewind.
Press F2 and hold to rewind until released.
To pay out continuously
Press F3 once to feed cable to the crawler continuously.
To rewind continuously
Press F4 once to rewind the cable continuously.
To wind with crawler
Each press of F5 decreases the torque.
To wind manually
Each press of F6 increases the torque.
4. Press OK when you have nished. If the motorised cable reel is
continuously paying out or rewinding, it will continue to do so.
3. Then press the appropriately coloured key to select the required
operation:
86
Version LMinicam Proteus
To Next Page
Loading...
