351
Kaleido-X
User’s Manual
4 Type a name for the Kahuna production switcher, and then click OK.
5Click the Interconnects tab.
6 Position the pointer over the multiviewer icon, then click and drag towards the Kahuna
production switcher icon.
A line representing the connection between the multiviewer and the device appears.
Connection between the multiviewer and the device
7 Click the connection line between multiviewer and device.
8In the Properties pane, select the appropriate element from the RS-422
communication port list.
9In the Interconnects tab, click the Kahuna production switcher icon.
10 In the Properties pane, set the serial
communications properties for the Kahuna device as
follows:
11 In the Channels/Sources tab, create logical sources
using Text and Alarm elements coming from the
Kahuna’s serial tally information.
Baud Rate 115200
Data Bits 8
Parity NONE
Stop bits 1
To Next Page
Loading...
