82
Managing Kaleido-X Systems
Creating a Cluster
on page 67.
You are now ready to add more multiviewers to the system.
2 In the equipment library, select any multiviewer model, and then drag it onto the root
of the System hierarchical list.
The Add Multiviewer to Cluster window appears.
IP addresses for all the multiviewer systems that are on the same subnet as your PC are
included in the list.
3 If your PC and the multiviewer you wish to add are on the same subnet, then you can
select the multiviewer’s IP address from the list. Otherwise enter the appropriate IP
address in the box.
The multiviewer is added to the System list.
4Repeat from step 2 until you have added all the required devices to the cluster.
Note: The appropriate multiviewer model is automatically selected, based
on the actual target system.
To Next Page
Loading...
Need help?
General
