2. CNC Monitor Screen
2.6 Data In/Out
I - 153
2.6.3.4 Changing the Machining Program Number
The program
number of a machining program registered in memory can be changed.
To execute the number change command, set #4. Set the current and new program numbers in order.
(Example)
When O1000 is changed to
O3000:
# ( 4
)
O ( 1
0 0 0 ) → (3 0 0 0 )
Press the [INPUT] key.
1) Number change processing is initiated with
"NO. CHANGE EXECUTION" displayed in the
message field. This processing is completed in
a moment. Then, the message "NO. CHANGE
COMPLETE" is displayed.
To Next Page
Loading...
